A Guide to Jewellery Tool Kits for Beginners

Beginner’s Tool Kit

Buying a ready-made tool kit can be a great way to equip you with the basic tools needed to start making jewellery, or even replace tools you may have had in your workshop for some time.

In our range of jewellery tools, for instance, we offer many kits to choose from which all have been put together by experts who know exactly what you are going to need. You can also expect a considerable cost saving when buying your tools as part of a kit as opposed to buying each item separately, so it’s well worth considering one of these kits if you have multiple products to purchase.

But Which Jewellery Tool Kit Should I Buy?

This is where it gets a little trickier! To help you with this difficult decision-making process we have put together the following handy YouTube video, which talks you through each of our jewellery tool kits piece by piece, allowing you to view each item much more closely before buying.

We have also put together the simple tick list comparison chart below which will enable you to see at a glance which kit contains what tools, along with the product code for reference:

Product Code 997 1001 997 1002 997 1003 997 1005
Name Beginners Tool Kit Student Starter Kit Workbench

Tool Kit

University Student Tool Kit
Tool Box Y Y Y
Saw Y Y Y Y
Extra Blades Y Y Y
File Y Y Y
File Handle Y Y Y
Needle Files Y Y Y Y
Hammer Y Y
Raw Hide Mallet Y
Flux Y
Metal Ruler Y Y Y Y
Steel Square Y
Dividers Y
Digital Vernier Gauge Y
Metal Tweezers Y
Reverse Action Tweezers Y
Soldering Torch
Soldering Block Y
Honeycomb Board Y
Scriber Y Y Y Y
Emery Sticks Y Y Y Y
Pliers Y Y Y Y
Metal Shears Y
Bench Anvil Y
Bench Peg Y Y
Binding Wire Y
Centre Punch Y

Here is a little more information on each of the kits, to give you a helping hand in selecting the right one for you and your workspace:

Beginner’s Tool Kit

As a rough guide we would suggest the basic Beginners Tool Kit for anyone curious about making jewellery, but is a little unsure. This kit will enable you to mark out, saw pierce and shape sheet metal and wire. It also contains a small jobbing hammer which could be used for riveting and other cold fixing processes.

Student Starter Kit

Student Starter Kit

The next step up from the basic tool kit is the Student Starter Kit, which essentially gives you a full-size file and a toolbox in addition to everything contained in the beginners kit (with the exception of the hammer). Obviously, a larger file means you can work on bigger pieces and remove material more efficiently, plus you get the toolbox to keep everything in.

Workbench Tool Kit

Workbench Tool Kit

One step up from this student kit is the Workbench Tool Kit, which contains an additional bench peg and anvil – so it does indeed equip your workshop as well as your set of jewellery tools as the name suggests. It is the perfect kit for those who are new to jewellery making and are looking for a comprehensive set of essential tools to get started.

University Student Tool Kit

University Student Tool Kit

Finally, the crème de la crème is the University Student Tool Kit which literally covers all bases, and includes almost everything available in the workbench tool kit along with additional hammers, tweezers, a vernier gauge and more. However, it is worth pointing out that whilst this kit includes soldering equipment too, it doesn’t contain the torch itself – so this will need to be purchased separately in addition to extra saw blades which are also not included.

Whichever jewellery tool kit you decide to go for, you can be sure that each contains a set of high-quality tools and equipment for jewellery makers. Not only that, they are all conveniently put together in a handy kit so you can take the headache out of kitting out your workspace.

Need to equip your workshop with the essentials for a particular jewellery making technique instead?

Our extensive selection of tool kits for jewellers also includes sets which are ideal for those who are looking for the tools required for soldering, polishing, beading and more – no matter whether you are a beginner jewellery maker or a more experienced jeweller who wants to refresh their used tools.

Source link

Your Guide To The Best Drill Bits For Metal

metal drill bit

Starting out in the jewellery making industry can be challenging, but if you’re equipped with the right tools to create original, statement pieces, it becomes a whole lot easier.

That’s why we’ve put together a simple guide to choosing the best drill bits for metal jewellery. There are different touches you can give your jewellery using metal drill bits, depending on the style and finish you’re hoping to create. Read on to discover more.

Different drill bit sizes

The best drill bits for metal jewellery can vary depending on size. Whether you’re creating larger holes in a cuff, or perhaps a daintier rivet hole in a bracelet, choosing the correct drill bit sizes goes a long way to achieving the desired result.

We stock metal drill bits in a variety of sizes. Our Busch Shank Drill 0.5mm enables you to drill smaller holes, for more delicate requirements, or even surface patterns.

For larger, thicker gauge jewellery pieces, a bigger drill bit size may be necessary. If you’re making a set of chunky metal bangles and you want holes for beadwork, a Busch Shank Drill 1.5mm may be more appropriate.

Different drill bit types for metal

Another way to choose the best drill bits for metal jewellery creation is to consider the different types.

Not only do drill bits come in different sizes with varying millimetre thicknesses, they can also have several other differentiating properties. We’ve listed some of these below:

  • Compositionthe harder the material you work with, the harder your drill bit should be. Some of our drill bits are constructed from high speed steel rather than regular steel, which makes them last longer and able to withstand high temperatures.
  • Twisted Drill twisted drill bits are typically the same thickness from shank through to drill tip, offering a sturdy drilling experience and the chance to drill further than a shanked drill.
  • Pearl drills if you’re creating a piece of metal jewellery that features pearls, you may consider using a pearl drill. These are specially designed to stop the nacre from chipping when you drill pearls, enabling you to create your desired piece without destroying your materials.
  • Diamond Twist Drill – If you’re working with gemstones or even glass a diamond twist drill is ideal. Coated in diamond, these drills are ideal for drilling small holes in gemstones for jewellery applications and perfect for drilling holes in glass.

HSS drill bits for metal

One type of drill bit we mentioned above are drills with a twisted shape. Typically, these are HSS (high-speed steel) twisted drills and they’re designed to broaden your cutting landscape.

The high speed and harder composition means these drill bits can withstand high temperatures during jewellery making and are ideal for using with materials other than metal. Hardwood, glass, shell and stone are some of the materials you may want to experiment with.

Diamond drill bits

Our diamond drill bits are designed to drill materials like stone, as the cutting end is typically coated in tiny diamond pieces.

diamond drill bit

This allows for a more aggressive cut, but in most stone drilling scenarios you’d need lubrication. Diamond drill bits aren’t designed for cutting further than the cutting end, but they’re able to cut through harder materials.

Tools to use drill bits with

You can use your metal drill bits with many of our drills, including the Foredom Pendant Motor Sr Jewellers Kit Quick Release System. Unlock power and performance while you work with this kit, allowing you to master control with an easy handpiece and foot pedal. Whether you’re drilling larger holes with thicker drill bits or you’re attempting an intricate design, the Foredom Pendant Motor SR Jewellers Kit can help you develop your technique.

Take a look at our other pendant drills and choose from handpieces, multi-systems and other accessories to accompany your drill bit kits, ensuring the drill bits fit the collet.

A lubricant will need to be used – Burr Life (998 021) to help it drill and also prolongs the life of the drill bit.

Why would you need metal drill bits?

If you’re stuck for ideas on what to use your drill bits for, we’ve come up with a couple of examples for you to get started with.

1. Sawing a pattern

You may want to create an intricate pattern on a pendant, ring or other piece of statement jewellery. The easiest and most accurate way to do this is to use a saw blade and saw frame, allowing you to cut and shape your jewellery and achieve the look you want.

You’ll need to drill a hole through your metal to get started. The hole must be large enough to fit the saw through, so depending on the size you’re using, you may want to consider different drill bit sizes.

2. Adding jump rings and chains to pendants

Finished creating a statement pendant? You may need to attach a jump ring to loop a chain through, or you may choose to loop the chain through the pendant without a jump ring. Whatever the case, you’ll need to use a drill bit to create the hole for this.

Find the best drill bits for metal jewellery creations today

Now you’ve got some examples to work with, and more information on drill bits and their uses, why not check out our selection of drill bits and get started today? It doesn’t matter if your first go doesn’t work – it’s all about experimenting and developing your personal technique. Read our Beginner’s Guides to find out more about different jewellery tools, materials and inspiration.

Source link